Last month's column covered the behavior of electrical components connected in series and demonstrated that when a voltage is applied across a series circuit, the current through each component is the ...

Voltage is a measure of the difference in energy between one part of a circuit and another. It tells you how much electrical energy has been converted into other forms of energy. Voltage is measured ...

In Part 1 of the Electronics for Kids series, we looked at LEDs; in Part 2, we explored capacitors; and in Part 3, we took an in-depth look at electrical measurements. In this article, we will focus ...

Parallel Circuit Calculations provides a comprehensive overview of the rules and formulas used to calculate electrical quantities and capacity. Using a direct current parallel circuit as an example, ...

Series and Parallel Circuit Series and parallel circuits are two fundamental configurations in electrical circuits, each with distinct characteristics that affect how electricity flows through them.

It’s often necessary to connect point-of- load (POL) dc/dc power supply modules in parallel to get a sufficiently high-current output for applications such as test instruments, blade servers, and so ...

To improve efficiency in high-power applications, voltage regulators can be used in parallel to double output current capability—if a means of forcing current sharing is provided. One circuit approach ...

See Part 1, Part 2, and Part 3 of this series. The previous FET circuits pertained to voltage-controlled signal amplitude circuits. That is, the input signal’s amplitude can be changed at the output ...

Electric circuits often consist of several elements, some combined in series and others in parallel. The methods used to analyze series and parallel circuits can be combined to analyze these ...

Two lamps connected in series with an open switch and a cell The circuit diagram shows a circuit with two lamps connected in series. If one lamp breaks, the other lamp will not light. The current is ...

Situation: You’re an IT person new to radio broadcast engineering and are given the keys to an AM transmitter site. The manager says to go out and get familiar with the equipment. The site reminds you ...