GE Cync Paddle Dimmer Smart Switch review: Back to simple

GE Lighting’s Cync brand takes a much-needed break from its typically overdesigned and overcomplicated in-wall switch design ...
YouTube on MSN

Homemade Christmas jumper | Arduino and RGB LEDs

In this project I did a Christmas jumper with rgb LEDs, this can also be a creative clothing project or whatever you want, it ...

Should You Buy a Smart Plug?

Smart plugs can add controls to any outlet, but they aren’t perfect for everything. Here’s our guide to using one and which ...
Digital Camera World on MSN

Godox iT32 & X5 review: an ingenious cross-brand flash and trigger kit that’s more than the sum of its parts

The Godox iT32 flash and X5 wireless trigger join together with magnetic attraction but additional triggers make dedicated ...
Hackaday

Building An Escape Room Lockbox With The ESP32 Cheap Yellow Display (CYD)

Escape Room Lockbox with the Cheap Yellow Display. You may have heard of the “cheap yellow display” (CYD), so-called ...
The Ambient

SwitchBot AI Art Frame Review

The bigger options get expensive, but the smaller SwitchBot AI Art Frame is a fun tool for showing off your photos or for ...
GitHub

Mapping HPS Peripherals, like I²C or CAN, over the FPGA fabric to FPGA I/O and using embedded Linux to control them

Development Boards for Intel SoC-FPGA allow often only a simple access to FPGA I/O-Pins. The only way to use HPS-Hard-IP Interfaces with these boards is the routing over the FPGA fabric. With this ...