No connection - G4x - Forums | Link Engine Management
Sep 8, 2020 · ECU model: G4+ G4x. Serial Number: 999999. Posted December 1, 2021. The car I had the most difficulty maintaining any type of connection with the engine running on the G4x also had some non-resistor plugs in it as it turned out. Putting in resistor plugs dramatically improved the ability to maintain connection.
A Dashboard App for Android & Windows - Link Engine …
Jun 25, 2018 · Connection to your tablet/smartphone is direct using your normal Link USB tuning cable, for phones/tablets that only have a micro USB port you will need a "Micro USB OTG adapter". Instructions for setup and connection attached to bottom of this post. RealDash Premium Supercar dashboard 2.
Issue Connecting ECU to PC - G4+ - Forums - Link Engine …
Posted June 11, 2020. I have a WRX2 G4+ and i'm unable to link the ECU to the PC. I've tried 3 PC's, all running Windows 10 64bit. After installing PC Link i'm not seeing anything in device manager. When i plug in the ECU it shows "Link ECU", which is listed under other devices. When i manually install the USB drivers, nothing happens.
PC Link and Firmware 6.20 released - G4x - Forums - Link Engine …
Apr 22, 2021 · 1）Laptop connection 2) Ignition ON (3) Check online with PCLINK Rename the ECU data and save it on the laptop. (Do not write to link ecu) (5) Turn off the ignition. (Confirm complete shutdown) 6) The ECU does not start up even if the ignition is turned on. (The operation check LED does not light up.)
Support Forums | Link Engine Management
The LinkECU Forum is a free online community, where you will be able to find expert answers to common issues and have discussions with other LinkECU users.
G4+ 5.6.8 PC Link & Firmware 5.6.8 Released - Link Engine …
Oct 17, 2020 · Vaughan. V5.6.8.3671 firmware is included in the v5.6.8.3669 PCLink so install the PCLink G4+ EN-JP V5.6.8.3669.exe file and upgrade your firmware using the "Firmware 5.6.8.3671.LFM" file which is included in that install. I'll poke the website guy about getting those release notes fixed.
Help Identifying my ECU and Related Software - Link G4
May 19, 2020 · Hello Everyone, I recently purchased an 04 JDM STI and got a CEL. Upon investigation I realised the ECU is not OEM but carries a board with the following markings: PCB Rev 1.2 Serial# 16816 I tried connecting it to the PC via the USB cable with the latest G4+ software and it says "the ECU is too ...
Windows 10 , USB driver issue. - G4+ - Forums - Link Engine …
Aug 12, 2020 · I'm running windows 10 (latest updates installed) along with the latest Link Ecu software. When plugging the USB Cable in, the PC recognises that I've plugged it in, however, when looking at device manager, it has the dreaded triangle. So, from there, I re-installed the drivers, which completed successfully, however triangle still there.
Software to use - G4+ - Forums | Link Engine Management
Posted September 29, 2018. If you install the software and connect the ECU , once online with the ECU the map will automatically load. Then, look down the left hand side and expand the analogue inputs tree. Have a look at the an volt 5 function and see what it is assigned to. That might shed some light on the fault.
G4+ - Forums - Link Engine Management
Jun 25, 2018 · G4 plus PnP GTR34 hks v cam 1 2. By CHESTER, March 23, 2016. 26 replies. 3.5k views. etang789. October 15.